How To Make A BBQ Braai Table From An Industrial Cable Reel
You won't believe this "How To Make A BBQ Braai Table From An Industrial Cable Reel!" Sometimes the best DIY projects can be done with the things you have lying around the house collecting dust, and this BBQ Braai table is just the perfect thing to make.
This barbecue Braai table made from an industrial cable reel can be made in just six steps. To start you need to find an industrial cable reel. Once you have found your industrial cable reel, you will roll it into your workshop or work area. Next sand down the industrial cable reel, and get rid of all the nail heads and ends sticking out. You might need to replace a few pieces of plank depending on the condition. Next you will need to cut a hole in the center of the industrial cable reel. If you have seen one of these before you would know that there are four threaded rods that run from one end to the other (top to bottom) to hold the reel in place. You will need to tighten the nuts on these rods for the table to have extra stability. When you are satisfied with the stability and the smoothness of the industrial cable reel, you will then need to cut a hole, which can be a circle or a hexagon in the center. The hole will have to be within the centre of the threaded rods. So in other words the rods will be on the outside of the circumference of the hole. Very important to remember that before cutting the hole you will need to decide on what size barbecue or Braai you want. On the site you will find the full step by step instructions with photos.
Typically barbecue is either a cooking method or a cooking apparatus. The difference between barbecuing and grilling has to do with the cooking times and the types of heat used. Grilling is most often done quickly over moderate to high direct heat with little smoke, while barbecuing is done more slowly over low indirect heat and the food is flavored by the smoking process. There are different barbecue sauces and ways of doing depending where you are in the world.
Do it yourself, also known as DIY is the method of building, modifying, or repairing something without the aid of experts or professionals. Academic research describes DIY as behaviors where individuals engage raw and semi raw materials and component parts to produce, transform, or reconstruct material possessions, including those drawn from the natural environment. DIY behavior can be triggered by various motivations previously categorized as marketplace motivations such as cost savings, lack of product availability, lack of product quality, or a need for customization. Do it yourself projects have only become more popular in recent years with website that are dedicated to DIY projects, whatever it is you want to build there is sure to be a video or some sort of step by step instructions to do it on the web.
Step 1: Find an industrial cable reel
Once you have found your industrial cable reel, roll it into your workshop and smile.
Reason being: the endless possibilities that lie ahead.
Step 2: Sand it down
I decided to make a "sit/stand around" BBQ/Braai table.
Sand it down and get rid of all the nail heads and ends sticking out.
You might need to replace a few pieces of plank depending on the condition.
Step 3: Cut a hole in the centre
If you have seen one of these before you would know that there are 4 threaded rods running from one end to the other (top to bottom) to hold the reel in place.
You will need to tighten the nuts on these rods for the table to have extra stability.
When you are satisfied with the stability and the smoothness of it you will then need to cut a hole (Circle, hexagon) in the centre.
The hole will have to be within the centre of the threaded rods. In other words the rods will be on the outside of the circumference of the hole.
REMEMBER!!! Before cutting the hole you will need to decide on what size BBQ or Braai you want.
I found that a hole big enough to fit in a 57cm or 22.4in is just perfect.
Step 4: BBQ/Braai Stand fit in
A nice neat cut and the BBQ/Braai stand will fit in perfectly.
You can either make the stand or buy one that you like. I opted to buy one.
Step 5: Varnish
When you are happy that you BBQ/Braai stand fits in properly you can then remove it and get ready to treat and varnish.
I treated with linseed oil and let it set in and dry for about 24 hours.
Once dry, I sprayed on the varnish.
I found that one coat did not really give it the effect that I wanted so I gave it about 3 coats of varnish.
Also, there are a lot of gaps within the slats. Make sure your varnish goes in properly, especially if your area is not under covers.
Step 6: Get ready to CHOW DOWN
Let the varnish dry completely for a few days before using.
I let it set for about 2 weeks.
As you can see in the picture. I laced the cut edge of the table with a thick piece of foil.
This helps for a tight fit and also so that the wood around the stand doesn't burn.
Oh and if you wondering about cleaning... its quite simple as the BBQ/Braai stand simply lifts out.
Been using it for about a year now and it's one of the best things I have ever done for family and buddy BBQ/Braai time.
Learn MORE at Instructables
To help with slow website load, we have put all photos for this article here: View photo gallery.
Don't Miss This